Results 1 to 9 of 9
  1. #1
    Senior Member greywolf67nt's Avatar
    Join Date
    Jun 2014
    Location
    Norman Wells, NT
    Posts
    1,136

    Lapping Compound Substitute

    I have a new 1911 bushing that is really tight and don't want to screw it up using a dremel or sand paper.
    Is there some common household products I can use to make my own?
    Someone (doing Google search) said toothpaste so I felt some and the grit in it would take me a hundred years to lap ANYTHING.
    He who hits first wins, regardless of the speed of the opponentís miss.

  2. #2
    Senior Member RobertMcC's Avatar
    Join Date
    Jan 2016
    Location
    Nova Scotia.
    Posts
    3,541
    Bushing to frame or the grip screws? Because I feel trying to lap those would take long. Be alot of in til tight, out, in till tight. More chances of ruining the flat head slot.

    I would just get like 600 gritt and spin them on the sand paper. Take a little off. or could try freezing them.
    When the rich wage war, It's the poor who die.

  3. #3
    Senior Member greywolf67nt's Avatar
    Join Date
    Jun 2014
    Location
    Norman Wells, NT
    Posts
    1,136
    Quote Originally Posted by RobertMcC View Post
    Bushing to frame or the grip screws?
    Barrel bushing
    He who hits first wins, regardless of the speed of the opponentís miss.

  4. #4
    Super Moderator Rory McCanuck's Avatar
    Join Date
    Apr 2012
    Location
    Middle of Manitoba
    Posts
    9,871
    GoJo hand cleaner with pumice?
    Not sure if the rock will stand up, but might be worth a shot.
    Toothpaste would work too, and do a great job of poliching it smooth.
    Might take a bit, but that's better than rushing it and finding out you took off too much.
    Don't blame me, I didn't vote for that clown. Oct 20, '15

  5. #5
    One Mile Mentor tigrr's Avatar
    Join Date
    Jun 2012
    Location
    Horsefly BC
    Posts
    1,573
    Load and shoot, it will loosen up and be fun doing it!! Polishing the inside of a tube will be more difficult than polishing the outside of a barrel. Your up there or I would say stop by Princess auto and buy some polishing compound. Know anyone with a rock polisher? A 410 cal swab in a drill.
    The challenge of retirement is how to spend time without spending money.
    There is no place in an anti's head where reason can enter. from a Napoleon saying with a tweak.
    Look around is there someone you can introduce to shooting because thatís the only way we will buck the anti gun trend sweeping Canada! "tigrr 2006"

  6. #6
    Senior Member greywolf67nt's Avatar
    Join Date
    Jun 2014
    Location
    Norman Wells, NT
    Posts
    1,136
    Quote Originally Posted by tigrr View Post
    Load and shoot, it will loosen up and be fun doing it!! Polishing the inside of a tube will be more difficult than polishing the outside of a barrel. Your up there or I would say stop by Princess auto and buy some polishing compound. Know anyone with a rock polisher? A 410 cal swab in a drill.
    It's the bushing fit in the slide. I had to have a 4' snipe on the bushing wrench to get it out when I first put it in
    The barrel/bushing fit is perfect.
    I had some 600 wet/dry paper here and got it REALLY snug now. I am going to hit up some mechanic friends in town to see if they may have some valve compound to just take it a titch more.
    He who hits first wins, regardless of the speed of the opponentís miss.

  7. #7
    Senior Member SwissArmyMan's Avatar
    Join Date
    Jun 2018
    Posts
    217
    Use some steel wool, then emery cloth.

  8. #8
    Senior Member
    Join Date
    Sep 2015
    Location
    SWOntario
    Posts
    1,921
    Barrel bushing are supposed to be tight. Buy the tool. You can have one from Dillon via Firearms Outlet Canada for $6.95Cdn.
    However, lapping compound isn't horribly expensive or hard to come by. 115 ml runs $10 in Crappy Tire.
    Last edited by Justice; 09-10-2018 at 11:51 AM.

  9. #9
    Senior Member greywolf67nt's Avatar
    Join Date
    Jun 2014
    Location
    Norman Wells, NT
    Posts
    1,136
    Quote Originally Posted by Justice View Post
    Barrel bushing are supposed to be tight.
    This one was in there tighter than a ducks arse hole

    Quote Originally Posted by Justice View Post
    Buy the tool.
    I have seven already

    Quote Originally Posted by Justice View Post
    115 ml runs $10 in Crappy Tire
    Google Norman Wells, NT

    I ordered this tonight we'll see what happens.
    https://www.amazon.ca/dp/B00OM9Q0Z4/...709270_TE_item
    Lapping.jpg
    Last edited by greywolf67nt; 09-10-2018 at 09:29 PM.
    He who hits first wins, regardless of the speed of the opponentís miss.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •