Stag-10 CDN Rifle (received NR Status)

[DuhBoredShooter]

Wait... so i can buy the lower receiver and drop a .223 upper and get a non-restricted AR??

[ESnel]

Wait... so i can buy the lower receiver and drop a .223 upper and get a non-restricted AR??

It's doable but not with the Stag 10,and it can't be an AR upper or AR varient

[DuhBoredShooter]

It's doable but not with the Stag 10,and it can't be an AR upper or AR varient

Why not? I thought the lower was the "firearm"

Sent from my SM-G935F using Tapatalk

[lone-wolf]

If the lower was capable of mounting an ar15 upper, even if duct tape was needed to secure it, then it would of been classed as an ar15 variant.

[ESnel]

Why not? I thought the lower was the "firearm"

Sent from my SM-G935F using Tapatalk

It is but if the lower accepts AR-15 uppers then it's considered an AR or AR variant. Also note the Stag 10 is built around the .308 and larger so matching an AR-15 upper would be to small(width,distance between pins).

Canada Ammo sold/sell a single shot .50 upper that fits an AR-15 lower which makes it restricted. A Canadian company offered a lower which required permanently modifying the upper so it no longer worked with an AR-15 lower. Under those conditions the rifle now became a non-restricted.

There are a number of companies that manufacture a proprietary upper/lower that use a large number of AR parts but don't fit AR uppers/lowers. The Stag 10 is an example of this as to the number of DPMS 308 AR parts it uses but is not considered a 308 AR or variant.

[play.soccer]

I think my handguard from brownells is at the post office. If so I'll be able to put it together tonight.

[mrCanoehead]

There are a number of companies that manufacture a proprietary upper/lower that use a large number of AR parts but don't fit AR uppers/lowers. The Stag 10 is an example of this as to the number of DPMS 308 AR parts it uses but is not considered a 308 AR or variant.

You can fit at least one upper that is supplied with a restricted rifle, to the Stag 10 lower.

[JustBen]

You can fit at least one upper that is supplied with a restricted rifle, to the Stag 10 lower.

And which upper is that?

The Stag 10 is only restricted if the barrel is too short. Regular AR10 and AR15 uppers do not fit. Its a proprietary design that is not compatible with others, hence the non-restricted status. But thanks for coming out.

[mrCanoehead]

Shrug. Mine fits and it fires great. Takedown pins are a little tight, that's all. Trigger is aftermarket though.

[JustBen]

Shrug. Mine fits and it fires great. Takedown pins are a little tight, that's all. Trigger is aftermarket though.

And what upper did you make fit? Pictures?