What does everyone use for printable targets, if you use them I guess?
And what reasons do you use the one you do?
Printable View
What does everyone use for printable targets, if you use them I guess?
And what reasons do you use the one you do?
Well, depending on where I'm working I have some large plotters and printers at my disposal. And assorted graphics programs for designs and overlays on images. Depending on shooting mood, almost any kind of pattern or theme can be made.Quote:
Originally Posted by Lazagna
Internet has a lot of targets available without any work. If 8x11 works for you, go crazy. However, there's some 11x17 colour printers available pretty cheap as well. Replace the black cartridge in a inkjet monochrome printer for a better colour helps as well. Just tape over ports of whatever you've got out.
http://mytargets.com/
http://targetz.com/
Both have a bunch of good ones.
Find a few that you like and print them out.
Take them to the range and shot them.
Figure out which ones you like.
The ones you thought were great when sitting at your computer are not likely the ones you'll like at the range.
Once you've decided the 'keepers', print out one of each.
Take them to Staples, and print out 100 of each.
Copies are 10 cents apiece for black&white; printing them at home will drain a cartridge pdq.
I made my own, but I don't have a copy of it online. Picture a blank sheet of paper with a 3/4" black dot in the middle of it. Now put a 1/4" white dot in the middle of the black. That's my entire target.
6mmbr has a large selection of free targets.
I've used DND black target patches (about 1 1/8" square) with an orange 1/4" dot in the center for 100 yd targets.Quote:
Originally Posted by blacksmithden
Thanks for the info
currently I like this one
http://www.glock17.com/gid/3rdQtrMIS.pdf
:shoot2:
Printable targets here too. Even though the OP is old. Use the one you need or just want to use. Sighting in targets make sighting in easier.
http://www.accurateshooter.com/shooting-skills/targets/
Just plainly all over the internet. Personally I rather steel due to the report and the fact it last for a long time. There is AR500 target plate for $50 that I pain on grabbing.
I'll be making my own for a while, cut the size target I need from some old blinds and use a sharpie to mark what I want for a aiming point. Usually a circle some times a square.
I use these:
Quote:
Originally Posted by Rory McCanuck
And these:Quote:
Originally Posted by Justice
http://www.haleystrategic.com/image/...arget_Pack.zipQuote:
Haley Strategic Target Pack (ZIP file)
print this out
https://www.vipcutouts.com/media/com...ard-cutout.jpg
I find them very difficult to put in the three-ring binder though.Quote:
Originally Posted by KB_TheDireWolf
I use champion targets, the 5 aiming points in diamond shapes. There's actually like at least 10 aiming points I actually use on the target aside from the bullseyes.
For printing my own, a sharpie mark on a piece of paper suffices.
Quote "For printing my own, a sharpie mark on a piece of paper suffices."
50 pack of paper plates at wallmart and 2 inch yellow sticky dots from here
https://www.aliexpress.com/item/Smar...5-9377ee224680
Or those 3 inches for 11 cents a piece
https://www.aliexpress.com/item/Targ...00023.9.kVRdgq
I use the ones from Midwayusa
Seems like the perfect excuse to justify buy one of these to punch the holes needed... 38 ton universal ironworkerQuote:
Originally Posted by Rory McCanuck
http://pic20.picturetrail.com/VOL126.../385655987.jpg
This is a good collection of locations of targets. It is good to keep the links handy.
I agree, this is awesome!Quote:
Originally Posted by cowboy01
Sent from my SM-A520W using Tapatalk
I finally remembered to re-stock the folder Friday.Quote:
Originally Posted by Rory McCanuck
Went to a little hole-in-the-wall printer in Portage, and rather than 10 cents(I think the last trip to Staples was actually 12 cents), this place only charged 7 cents.
After taxes, 300 targets came out to $23.73, I was quite impressed.
And, it was an hour's less driving!
Great ideas here thanks
Zombie target?Quote:
Originally Posted by Steveo9mm
Well I'm down to 3 cents a copy on 3 holed punched paper(easier storage in binder).Quote:
Originally Posted by Rory McCanuck
Got a free B/W laser printer(person upgrading to colour),aftermarket replacement toner cartridge(Amazon),recycled printer paper. The plan is to make this a dedicated printer for targets,reloading data sheets,rifle data sheets etc.
http://i.imgur.com/H41bcnJ.png
Use my link below for the full sized target for printing
http://i.imgur.com/Pc4o4TA.png